How do I change the batteries in the Tranquil Turtle?

  1. Place unit on its back shell
  2. Pull up on fabric flap on bottom of unit to expose battery compartment and on/off power switch
  3. Check to make sure that power switch is in "off" position
  4. With a Phillips Head Screwdriver, unfasten the single small screw holding the battery door in place
    • This screw is located above the word "open" on the battery compartment door
  5. Lift up on the small black tab with upward pressure while unscrewing.
  6. Remove old batteries
  7. Install new AAA batteries
    • Please confirm that you have placed the batteries into the proper positive and negative positions within the battery compartment
    • Please confirm that the batteries have been completely "snapped" into the battery compartment
    • Improper battery installation may cause the unit to short circuit or malfunction
  8. Re-insert the battery compartment door
  9. Tighten the screw to secure the battery compartment door
    • NOTE: Please do not over tighten the screws. Over tightening the screws may cause the screw holes to strip
  10. Replace fabric flap over battery compartment and fasten
  11. Return the unit to upright position
  12. You are ready to use your Tranquil Product.