How does my Tranquil Turtle work?

  1. Place unit on its back shell
  2. Pull up on fabric flap on bottom of unit to expose battery compartment and on/off power switch
  3. Slide power switch to "on" position
  4. Replace fabric flap over battery compartment and fasten
  5. Return unit to upright position
  6. Press power button to start projection of lights - (first button on left – top row)
    • Adjust brightness using Slide Control (Just below battery compartment on bottom side of Turtle)
  7. Sound and volume control
    • NOTE: The motion of the water effect can be stopped entirely by pressing the ~ wave button on Tranquil Turtle shell.
    • Tranquil Melody - Second button (Top row) with ♫ music symbol
    • Ocean Waves - Third button (Top row) with ~ wave symbol
    • Press the sound button to toggle between the Ocean sound, the Tranquil melody or to switch the sound off entirely. (The two smaller buttons near the edge of the shell control the volume)
  8. Enjoy the Storybook, Adoption Certificate and Endangered Sea Animals Guide
  9. Lights can be turned off manually by pressing the power button once again or the units lights and sound will turn off automatically after 23 minutes.
  10. If you are not using the Tranquil Turtle we do recommend sliding the power switch on the bottom of the unit to the "off" position
  11. If you do not use the unit for an extended amount of time, please remove the batteries from the unit to avoid corrosion.
    • Please note: If batteries are left in any product for too long, the battery contacts can get corroded. This is not a manufacture defect.