How do I change the batteries in the sound box?

Change the batteries in the Sleep Sheep, Sleep on the Go, Dozy Dolphin, Gentle Giraffe and Gentle Giraffe on the Go Sound Box as follows:

 

  1. Make sure the unit is turned off.
  2. Place the unit on table with battery compartment facing up.
  3. With a Phillips Head Screwdriver, remove the two side by side screws fastening the battery compartment door to the sound box.
  4. With thumb, gently press on the battery door and slide the door to the side of the unit.
  5. Remove old batteries.
  6. Install new AA batteries. Please confirm that you have placed the batteries into the proper positive and negative positions within the battery compartment according to the markings in the battery compartment.
    Please confirm that the batteries have been completely "snapped" into the battery compartment. *CAUTION: Improper battery installation may cause the unit to short circuit or malfunction.
  7. Re-install the battery compartment door back on to the sound box.
  8. Tighten the two screws to secure the battery compartment door.
    *Please do not over-tighten the screws. Over-tightening the screws may cause the screw holes to strip.

Change the batteries in the Mimicking Monkey Sound Box as follows:

  1. Make sure the unit is turned off.
  2. Place the unit on table with battery compartment facing up.
  3. With a Philips Head Screwdriver, remove the two side by side screws fastening the battery compartment door to the sound box.
  4. With forefinger, gently pry open the battery compartment door.
  5. Remove old batteries.
  6. Install new AA batteries. Please confirm that you have placed the batteries into the proper positive and negative positions within the battery compartment. Please confirm that the batteries have been completely "snapped" into the battery compartment.
    *CAUTION: Improper battery installation may cause the unit to short circuit or malfunction
  7. Insert the battery compartment door back on to the sound box.
  8. Re-insert the two screws to secure the battery compartment door.
    *Please do not over tighten the screws. Over tightening the screws may cause the screw holes to strip.